The work of small wreckers is often carried out outdoors, and a clean appearance can make people feel relieved when they encounter problems. Knowing the following things that are likely to cause corrosion on the paint of the small wrecker, can make the paint on the wrecker as bright as new. 1, rain. Although rainwater is often present, it is not too corrosive. Even if it is poured directly onto the skin, it will not cause too much harm to the human body. As everyone knows, the rainwater that it realizes is biased toward acidity, allowing small wreckers to be kept in open air for a long period of time, and is not washed in time after the rainwater is poured over. Long-term maintenance of small wreckers It will be easily eroded by the acidic components of the rain. Therefore, if you want a small wrecker to paint as bright as new, you have to clean up the small wrecker after the rain. 2. Birds. Although the odds of being a Chinese bird are not great, it is not impossible to say that it is impossible. In particular, if there are many places where trees are to be cleared, then we must pay more attention to it. In fact, the cockles contain acidic substances that are stronger than rainwater. Once the beak is dropped on the paint of the small wrecker, it will not be treated in a timely manner. Therefore, it is easy to erode a small pit on the outside of the wagon. Therefore, if you want to make the small wrecker seem new, the paint will not be eroded, it is best to add a layer of coating on the paint to allow the beak to adhere to the coating instead of the car. The top of the paint. 3, iron powder. There are many tiny substances in the air, and most of these are things that we cannot observe only by our eyes. Iron powder is one of these tiny substances. During the repair work, iron powder directly penetrates into the paintwork of the vehicle body due to inertia, and quickly erodes the paint of the small wrecker when it oxidizes. 4, gum. In addition to removing the beak, the gum is the biggest enemy of the small wrecker's paint in nature. Because the gums are transparent, they are difficult to identify. Once the gum has condense into a block, it will make the body appear pits, in serious cases it will also cause cracks in the body.
B2 material Hot Rolling Grinding Ball are the automatic production, manufactured by rotary cutting and roll forging, has the advantages of large output, stable quality and high delivery speed,,especially suitable for long association purchasing of large mining groups. Zhongwei B2 Hot Rolling Grinding Ball available diameter from 20mm to 60mm.B2 raw material chemical composition is C:0.72-0.85, Si:0.17-0.37, Mn:0.7-1.0, Cr: 0.4-0.6, P:≤0.025, S:≤0.025, hardness is 55-65HRC.
B2 Hot Rolling Grinding Ball Steel Balls,B2 Grinding Ball,Hot Rolled Ball,B2 Hot Rolling Grinding Ball Jinan Zhongwei Casting And Forging Grinding Ball Co.,Ltd , https://www.cngrindingballs.com
What is the corrosion of the car paint on a small wrecker?