Three main points of safe operation of mobile stage cars

The mobile stage car is equipped with a stage structure, so it has certain technical requirements when it is operated. Before starting the trip, we must not only ensure the safety and security of all components, but also need to pay attention to the deployment of the control car when deploying the stage. If the operation is improper, it is easy to cause some accidents. Therefore, it is very useful to grasp the key points of safe operation of the mobile stage car.

Prior to the driver's mobile stage vehicle, need to do some necessary checks, because most of the cabin structure collapsed folding type, there is no general car full and firm, the driver must first make sure whether the compartment door is locked, then Check for loose screws on the parts. After confirmation, the passengers need to sit in the designated position, and some items should also be placed in the storage box. During the driving process, in order to reduce the change of the car caused by the shaking of the car, the people in the car do not want to move around at all. Everything is for the sake of safety, and only in this way can the safety during driving be ensured.

In addition, when driving a mobile stage car , drivers need to constantly observe the surrounding road conditions and accurately operate the steering wheel. When on the road, they must pay attention to the constant speed of the control car and avoid overtaking. In the event of an emergency, the driver must first slow down. Speed ​​then controls the brakes to avoid collisions. In addition, the driver needs to grasp a certain direction of travel, control a reasonable distance between cars to ensure safety, according to the car's rearview mirror to determine the safe distance. When turning at the intersection, you must slow down and control the balance of the entire car.

When arriving at the destination, the driver must first select the appropriate parking spot. Before the stage is unfolded, it must be ensured that there are no obstacles around the car. The relevant personnel must also stand in a safe place. The driver's license can control the switch to the stage. Slowly unfurling, the driver stops operating after the entire structure has been stretched. In the end, the staff began to make specific stage arrangements according to the needs of live performances.

Angle Cutting Saw

Angle Cutting Saw is used for HDPE, PVC, PP,PVDF pipes and fittings cutting, The Bandsaw Machines for Workshop are important cutting equipment for hdpe fitting fabrication preparation. In order to make hdpe elbow, tee,cross and wye fittings fabrication in workshop, this band saw must be multi-angle cutting with cutting angle 0-67.5° . It should have high angle precision for band saw machines to make accurate angle fitting fabrication. Wuxi Yuda has the ideal Angle Cutting equipment from 40-2600mm to match hdpe fittings fabrication machine. A table saw excels in cutting through bigger plastic pipes or thick plastic blocks. The best saw for cutting plastic pipe in angle can choose from DQJ series Multi-angle pipeline cutting machine. for example, DQJ315 Multi-angle HDPE Pipe Cutting Machine, DQJ630 & DQJ800 Plastic Pipe Band Saws, DQJ1200, DQJ1600 Band Saw Machines and DQJ2600 Poly Pipe Angle Cutting Saw. If for automatic cutting mode, you can choose DQJ-A series Automatic Plastic Cutting Equipment.

Angle Cutting Saw,Band Saw Cutting,Bandsaw Machine,Plastic Pipe Cutter

WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.pipefusionweldings.com