The town of Guangdong's Datang Town encountered a tornado raid on more than 7,000 households

The town of Guangdong's Datang Town encountered a tornado raid on more than 7,000 households

Guangdong town of Datang encountered a tornado raid on more than 7,000 households in the event of a blackout diesel generator | diesel generator price / 2012-04-19

When a couple tossed under the bed in Datang Town, Sanshui, it was still not working
Iron buckets that hold rice hold the roof to keep two lives
At noon on the 18th, a tornado swept through the town of Datang, Sanshui, Foshan. Nearly 7,000 households in the town had no electricity and their living production activities were affected to varying degrees.
At about 12 noon on the 18th, most of the weather in Foshan suddenly darkened, and soon the winds were heavy and heavy rains fell. In less than an hour, the first break in the showers began, and the wind gradually faded away. However, the homes of villagers in Datang Town, Sanshui District, are already a mess.
At 2 pm on the 18th, the reporter rushed to the village of Lotus Village in the town of Datang, where the disaster was severe. As soon as he entered the village, he saw many trees on both sides of the road were broken and the villagers went to the reporter to describe it: At about noon. At 12 o'clock, a strong wind accompanied the heavy rain from west to east. After a few minutes, many villagers found that the tiles on the roof were almost completely lifted. The chicken and duck sheds of farmers were fragmented after strong winds. There are villagers who paint in front of a tree that can be held by three or four people. "The tree was more than 170 years old and was also torn by a tornado from the waist."
The villager Luo Jinghua told reporters that at the time he was rushing home from the outside, but the strong winds came and he couldn't stand firm. He tried desperately to rely on a wall to keep his head from being blown off by the wind. Bruises. Li Keming and Liang Jinfeng, both husband and wife, had a lingering fear when they rented their vegetables at the rented place in Lincang Village. When the tornado passed, they accompanied the sound of “squeaking.” The couple were scared and drilled immediately under the bed. They did not expect to use materials such as wood and asbestos. The shack was instantly collapsed and the bed board was cut off. "If there was not a nearby drum with a metered iron drum on top of the fallen roof, we would not only suffer from this skin-wounding injury, and may not even have a life."
The reporter saw that next to the Yongping Primary School in Datang Town, two high voltage line towers of 10 kV were smashed by strong winds, and other low-voltage lines also failed. The four management areas in the town were thus in an emergency. According to Ouyang Guang, director of the Datang Power Supply Bureau, there are 7167 households in the town due to line failures.
On the afternoon of the 18th, the Sanshui District Bureau of Meteorology informed the reporter that between the 12 noon and 13:00 noon on the 18th, there was a strong convective weather in Datang Town, accompanied by a short-duration thunderstorm, a strong short-term rainfall, and partial accompanied by 10 to 11 grades. tornado. On the evening of the 18th, the government of Datang Town told reporters that there were no major casualties and that the aftermath was in progress.
Next:Installation, use and regulation of marine diesel generator sets
Prev:After the body in the tent at the top of Qinling Mountain

Anti-wear Ring

Installation and precautions of track connecting rod oil seal
The installation steps for the track link oil seal are as follows:
1. Cleaning: Clean the connecting parts to ensure that the surface is flat, clean, and free of grease and dirt.
2. Oil application: Apply a layer of lubricating oil to the connecting parts for better installation.
3. Installation: Gently push the oil seal into the connection area to ensure that the lip of the oil seal is not damaged.
4. Positioning: After positioning the oil seal, press it with your fingers to ensure it is in the correct position.
5. Inspection: Check if the oil seal is installed correctly and ensure that the lip is not damaged.
The precautions are as follows:
Before installation, check if the oil seal is damaged. If the oil seal is damaged, replace it with a new one.
Before installation, ensure that the surface of the connecting parts is flat, clean, and free of grease and dirt.
3. When installing the oil seal, gently push in to avoid damaging the lip of the oil seal.
4. After installation, check whether the oil seal is installed correctly to ensure that the lip is not damaged.
5. During use, the condition of the oil seal should be regularly checked. If any damage or wear is found, the oil seal should be replaced in a timely manner.

Wear ring for excavator,For excavator track,For excavator accessories

Safe Seal Technology Co., Ltd. , http://www.aprseal.com