1-Phase 220V IGBT HF TIG Welding Machine (TIG-200)

1-Phase 220V IGBT HF TIG Welding Machine (TIG-200)

Model NO.: TIG-200
HS Code: 8515319000
Model NO.: TIG-200
HS Code: 8515319000
Features:
1. Adopting the IGBT module and the special half-bridge inverter technology, frequency as high as 30kHz
2. Support MMA welding and TIG welding. In MMA welding, can work long hours, with duty cycle as high as 50%
3. In TIG welding, arc started by HF, arc can be started at the lowest current of 5A, high success rate in arc starting
4. In TIG welding, short welding and long welding supported
5. In long welding, arc-start current, welding current and collection current can change mutually
6. Time for pre-gas sending or post-gas sending can be set
7. With input of 1-phase 220V/240V, a fluctuation range of 15% is allowable
8. Auto protection from over/under-phase, overheat and over-current
9. Small, light and easy to operate, high reliability

1-Phase 220V IGBT HF TIG Welding Machine (TIG-200)
                  Model
Content		 TIG-160S TIG-180S TIG-200S
Power 1-phase  220V/50Hz  /60Hz,   1-phase  240V/50Hz/60Hz
Input  capacity 3.3KVA/5.3KVA 3.9KVA/6.2KVA 4.5KVA/7.5KVA
Input  current 15A/24.3A 17.8A/28.2A 20.7A/34A
Rated  welding  volt. TIG 160A/16.4V 180A/17.2V 200A/18V
MMA 160A/26.4V 180A/27.2V 180A/27.2V
Rated  current TIG 5A-160A 5A-180A 5A-200A
MMA 5A-160A 5A-180A 5A-180A
Arc-start.   curr. 5A-160A 5A-180A 5A-200A
Arc-collection  curr. 5A-160A 5A-180A 5A-200A
Pre-gas-sending  time 0.3S
Post-gas-sending  time 6S  or  10S
Rated  duty  cycle 50%
Efficiency 85%
Air  Switch 32A 40A 40A
Input  cable 2× 4+1× 1.5mm
Raising  means Handle
Insulation  class F
Protection  class IP21
External  feature Fall
Dimensions(mm) 405× 173× 370
Weight(Kg) 14 15 16
Features:
1. Adopting the IGBT module and the special half-bridge inverter technology, frequency as high as 30kHz
2. Support MMA welding and TIG welding. In MMA welding, can work long hours, with duty cycle as high as 50%
3. In TIG welding, arc started by HF, arc can be started at the lowest current of 5A, high success rate in arc starting
4. In TIG welding, short welding and long welding supported
5. In long welding, arc-start current, welding current and collection current can change mutually
6. Time for pre-gas sending or post-gas sending can be set
7. With input of 1-phase 220V/240V, a fluctuation range of 15% is allowable
8. Auto protection from over/under-phase, overheat and over-current
9. Small, light and easy to operate, high reliability

1-Phase 220V IGBT HF TIG Welding Machine (TIG-200)
                  Model
Content		 TIG-160S TIG-180S TIG-200S
Power 1-phase  220V/50Hz  /60Hz,   1-phase  240V/50Hz/60Hz
Input  capacity 3.3KVA/5.3KVA 3.9KVA/6.2KVA 4.5KVA/7.5KVA
Input  current 15A/24.3A 17.8A/28.2A 20.7A/34A
Rated  welding  volt. TIG 160A/16.4V 180A/17.2V 200A/18V
MMA 160A/26.4V 180A/27.2V 180A/27.2V
Rated  current TIG 5A-160A 5A-180A 5A-200A
MMA 5A-160A 5A-180A 5A-180A
Arc-start.   curr. 5A-160A 5A-180A 5A-200A
Arc-collection  curr. 5A-160A 5A-180A 5A-200A
Pre-gas-sending  time 0.3S
Post-gas-sending  time 6S  or  10S
Rated  duty  cycle 50%
Efficiency 85%
Air  Switch 32A 40A 40A
Input  cable 2× 4+1× 1.5mm
Raising  means Handle
Insulation  class F
Protection  class IP21
External  feature Fall
Dimensions(mm) 405× 173× 370
Weight(Kg) 14 15 16

Terry Towel Warp Knitting Machine

Terry Towel Warp Knitting Machine is a highly-speed warp knitting machine, which running speed could up to 1,300RPM. Thanks to advanced technology and carbon fiber material widely used, warp knitting terry towel machine becomes more stable and higher productive compared with other terry machines.

A-ZEN TS4-C terry towel warp knitting machines, which also be called KS4FBZ, is equipped with Germany Needles, Carbon-fiber Needle bed and bars, laser-stops device as well as other market-tested spare parts, because of which A-ZEN terry towel machines gain a market acceptance since last 4 years.

Piles of warp knitting terry could reach to 6mm while back side of terry could be 3-4mm. The weight of warp knitting terry usually from 200-400gsm. Microfiber Polyester, Polyamaid and cotton yarn are available in warp knitting terry machine.


Technical Data:

Working Width/Gauge: 186"/ E24;

Working Speed: 50-1300rpm (Depends on yarn and designs);

Pattern Drive System: Pattern Disc or EL Drive (Optional);

Yarn Let-off Device: Electronical Yarn Let-off System;

Fabric Take-up: Electronical Fabric Take-up System;

Batching Device: Electronical Batching Device;

Laser Stops Detector;

Individual Terry Pile Brushing Device;

Online Service Supported.

Details please check machine leaflet.



Terry Towel Warp knitting machine,Terry machine,Microfiber towel machine

CHANGZHOU A-ZEN TEXTILE TECHNOLOGY CO.,LTD , https://www.barmachinery.com

Next Article
Prev Article