Tungsten carbide thermal spray powder is a type of powder material that is used in thermal spray processes. It is composed of tungsten carbide particles, which are combined with a binder material to form a powder. Tungsten Carbides,Tungsten Carbide Powder,Tungsten Carbide Coating,HVOF Tungsten Carbide Coating Luoyang Golden Egret Geotools Co., Ltd , https://www.lygoldentool.com
Pan-28-1 well is a typical heavy oil well in Linpan Oilfield. October 2004 on the operation, shot open reservoir located in the well depth of 1734.4 meters to 1736.2 meters, the ground viscosity of crude oil 2500 milli-passeconds, the next normal pump is difficult to normal production. In this case, Linpan oil production plant technicians after careful analysis, repeated demonstration, the first selection of 56 mm XJFB-type pump, the next deep to 1201.75 meters, in October 2004 a well to open a success, the initial production parameters Cheng Chong 3 Rice, red three times, the daily output of 11.2 cubic meters, 9.6 tons of crude oil, water 14%. At present, the well production is stable.
The successful application of XJFB pump in the heavy oil cold recovery well 28-1 in Panxian Oilfield opens up a new way for the exploitation of heavy oil wells in Linpan Oilfield.
Thermal spraying is a coating process that involves heating the powder material to a molten or semi-molten state and then spraying it onto a surface to create a protective or functional coating. Tungsten carbide thermal spray powder is known for its hardness, wear resistance, and high melting point, making it suitable for applications where extreme wear or high temperatures are present.
XJFB pump in the Pro disk application success
The Shengli Oilfield Linpan Oil Production Plant is the first to apply the XJFB oil pump in heavy oil wells for its advantages of thick oil and heavy oil pumping.