Wall and Roof Panel Roll Forming Machine Gladzed Tile Roll Forming Machinery,Gladzed Tile Roll Forming Line,Gladzed Tile Making Machine Willing Technology Co., Ltd. , http://www.txrollformingmachine.com
Wet drum magnetic separator is suitable for strongly magnetic mineral. According to tank structure pattern can be divided into co-current, half-countercurrent, and countercurrent 3 kinds.
Co-current type magnetic separator (Â CTS) characteristics advantages: have a large capacity, suitable for processing coarse granularity (0-6mm) strong magnetic materials selection and selection can also work more than one thread. Disadvantages: when Co-current magnetic separator is fed more capacity iron ore, magnetic mineral particles easily lost in the tailings, so to strengthen the operational management and control to be a low pulp level.
Countercurrent type magnetic separator (CTN) characteristics advantages: with a higher recovery rate, suitable for fine-grained (0-1.5mm) strong magnetic minerals roughing and scavenging operations. Disadvantages: to get lower concentrate grade. Because coarse-grained material easy to plug the sorting room, so countercurrent-type magnetic separator does not be suitable for dealing with coarse-grained materials.
Advantages of half-countercurrent type magnetic separator (CTB) characteristics: to get high-quality iron ore concentrate, and better recovery, it is suitable for processing 0.5-0mm of the mineral particles, so half-countercurrent magnetic separator is widely used in different kind of industry.
Wet drum magnetic separator magnetic component
Wet Drum Separator Permanent magnetic system, using high-quality ferrite and rare-earth magnet material to be composited, the average tube surface magnetic flux density of 100 ~ 600mT (1000Gauss-6000Gauss). Wet drum magnetic separator mainly made up of the permanent magnet cylinder, roller, magnetic system, tank, transmission parts 5 parts.
Working principle:
When the ore pulp folw into the magnetic field, the strong magnetic minerals are adsorbed on the surface of the drum. The weak magnetic and non-magnetic minerals are cast off and discharged, while the strong magnetic minerals on the surface of the drum rotate with the drum and will be brought out of magnetic field to complete the sorting operation.
Sketch map:
The pictures above are the actual operations of our wet drum magnetic separators in the Indonesia.
Â
Wet drum magnetic separator is suitable for strongly magnetic mineral. According to tank structure pattern can be divided into co-current, half-countercurrent, and countercurrent 3 kinds.
Co-current type magnetic separator (Â CTS) characteristics advantages: have a large capacity, suitable for processing coarse granularity (0-6mm) strong magnetic materials selection and selection can also work more than one thread. Disadvantages: when Co-current magnetic separator is fed more capacity iron ore, magnetic mineral particles easily lost in the tailings, so to strengthen the operational management and control to be a low pulp level.
Countercurrent type magnetic separator (CTN) characteristics advantages: with a higher recovery rate, suitable for fine-grained (0-1.5mm) strong magnetic minerals roughing and scavenging operations. Disadvantages: to get lower concentrate grade. Because coarse-grained material easy to plug the sorting room, so countercurrent-type magnetic separator does not be suitable for dealing with coarse-grained materials.
Advantages of half-countercurrent type magnetic separator (CTB) characteristics: to get high-quality iron ore concentrate, and better recovery, it is suitable for processing 0.5-0mm of the mineral particles, so half-countercurrent magnetic separator is widely used in different kind of industry.
Wet drum magnetic separator magnetic component
Wet Drum Separator Permanent magnetic system, using high-quality ferrite and rare-earth magnet material to be composited, the average tube surface magnetic flux density of 100 ~ 600mT (1000Gauss-6000Gauss). Wet drum magnetic separator mainly made up of the permanent magnet cylinder, roller, magnetic system, tank, transmission parts 5 parts.
Working principle:
When the ore pulp folw into the magnetic field, the strong magnetic minerals are adsorbed on the surface of the drum. The weak magnetic and non-magnetic minerals are cast off and discharged, while the strong magnetic minerals on the surface of the drum rotate with the drum and will be brought out of magnetic field to complete the sorting operation.
Sketch map:
The pictures above are the actual operations of our wet drum magnetic separators in the Indonesia.
Â
Wet Permanent Magnetic Separator for Iron Sand
Model NO.: CTS/CTB/CTN
Energy Saving: Energy Saving
Warranty: 1 Year
Color: Multi Color
Customized: Customized
Condition: New
Product Name: Wet Permanent Magnetic Separator for Iron Sand
Type 1: Half Upstream Tank Drum Type
Type 2: Wet Type
Type3: Permanent Type
Model Choose: as Capacity 1-200t/H
Magnetic Intensity: 800-4000gauss
Dimensions Drum Diameter*Length mm: See Below Sheet
Motor Power: 1.1kw-11kw
Rotary Speed R/Min: 14-45
Weight Machine: 600-9300kg
Trademark: Shengyue
Transport Package: Packing by Container
Specification: As model
Origin: China Shandong Province
HS Code: 84741000
Model NO.: CTS/CTB/CTN
Energy Saving: Energy Saving
Warranty: 1 Year
Color: Multi Color
Customized: Customized
Condition: New
Product Name: Wet Permanent Magnetic Separator for Iron Sand
Type 1: Half Upstream Tank Drum Type
Type 2: Wet Type
Type3: Permanent Type
Model Choose: as Capacity 1-200t/H
Magnetic Intensity: 800-4000gauss
Dimensions Drum Diameter*Length mm: See Below Sheet
Motor Power: 1.1kw-11kw
Rotary Speed R/Min: 14-45
Weight Machine: 600-9300kg
Trademark: Shengyue
Transport Package: Packing by Container
Specification: As model
Origin: China Shandong Province
HS Code: 84741000
Classification of wet magnetic separatorPrev Article
Double Metal Glazed Roof Roll Forming Machine