2. Operators should be familiar with safety operation technical regulations, conduct safety education and guide operations before operation;
3. Enter the site to wear a qualified safety helmet, fasten the chin strap, lock the buckle, wear goggles and insulating gloves;
4. Observe the labor discipline at the construction site, dress code should be standardized, and do not wear light slippers;
5. It is forbidden to chase slapsticks and drink operations at the construction site;
6. Check whether the appearance of the cutting machine is in good condition before class, and whether the protective cover of the belt guard and cutting piece is complete;
7. The switch of the cutting machine handle is sensitive and effective, and no reverse switch shall be installed. One switch and one switch of the control switch shall be opened.
8. It is forbidden for the cutting machine to open weather in rain and snow weather to prevent electric shock accidents.
9. The cutting machine is equipped with a guard plate in front of the cutting chips to prevent the chips from burning or injuring people or causing fire;
9. Cutting discs should be purchased inspection qualified outer diameter edge or cut residual diameter less than 250mm should be replaced;
10. Clean iron scraps and debris at any time to keep the working point tidy and clean, so that the net is clean and the cutting point should be kept away from flammable materials and places where there are more walking people;
11. The cutting machine is strictly prohibited to use the grinding machine;
12. After the completion of the work, the power is turned off, the distribution box is locked, and the cutting of the outdoor service industry is completed; rain and snow measures shall be taken;
13. Before using the cutting machine which is not used for a long time, it shall firstly be checked whether the appearance is intact, whether the switch is flexible, whether the insulation value of the motor is within the allowable starting range and which is not allowed to be used below the starting requirement;
14. Dust masks and goggles must be worn during the cutting operation.
The above content is based on the problems encountered by the students in the actual work, for reference, if you have any questions, please communicate and correct.
The trends of the Metal Scrap recycling industry
Recycled scrap consists of 58% of post-consumer products that are considered to be obsolete or outdated. 24% of this material is prompt scrap, which is produced in manufacturing plants that create steel. 18% of the industry involves home scrap, which is produced by current operations.
Steel and aluminum can be infinitely recycled. Scrap metal consists of ferrous metals or nonferrous metals. Large items such as cars, dishwashers, washing machines, stoves, and refrigerators are generally created from metal and therefore the best items to recycle.
By baling the products, the volume of metal scrap is greatly reduced, often up to seventy-five per cent.
By reducing the volume in this way, the smelting costs are reduced. In addition, the overall process of recycling and re-casting can be done more quickly.
Manual Metal balers are economically and environmentally beneficial in reducing metal waste. They lower costs, are space-efficient and make transporting the materials much easier.
The Manual Metal Baling press makes your metal recycling more efficient and profitable.
The Y81 series Manual Waste Metal Scrap Baler could not only press all non-ferrous metals such as copper, brass, and aluminium can be recycled as well as ferrous metals from steel to stainless steel, with various sizes for option, high-density compression, compact and strong. Low energy consumption but fast production rate.
Y81 series hydraulic metal baler mainly include the following models.
Y81F (side turn discharge ), Y81T (side push discharge), Y81Q (front push discharge) and Y81S (Double main press ).
We also support the design and manufacture of other model versions upon request.
Y81Q-Manual operation (Front push discharge )
Y81F-Manual operation (Side turn discharge )
Y81F-Semi-automatic operation (Side turn discharge )
Y81T-Semi-automatic operation (Side push discharge )
Y81S-Semi-automatic operation (Double main press discharge )
We provide a variety of models of the hydraulic metal baler, With new technologies to raise the quality and reduce the price, which supports 24 hours fully automatic working environment.
YMSRECYCLING offer economical and effective solutions to help you to process different metal scraps.
The Metal Baling Press can be customized and extended according to the actual needs of your on-site.
CONTACT YMSRECYCLING
Call us now on +86-15950122559
To start maximising your returns from your metal scrap recycling.
Please email sales@ymsrecycling.com or visit our website directly for further information about the products you are interested in.
Manual Metal Baler,Manual Waste Metal Baler,Manual Metal Baling Press,Manual Metal Recycling Baler
Jiangyin Yimaisheng Hydraulic Machinery Co., Ltd. , https://www.ymsrecycling.com