During operation, water chiller will take some
heat away through exhaust outlet. But when indoor space is small, room
temperature will rise. Is there any solution to this problem?
CONTACT
S&A
TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE:
teyuchiller
Email:
Website: http://
Hydraulic metal machine is mainly applicable to steel mills, recycling and processing industries and non-ferrous metal smelting industries. Hydraulic Baling Machine can squeeze all kinds of metal scrap (steel shaving, waste steel, waste aluminum, waste copper, waste stainless steel and scrap automobile waste, etc.) into cuboid, octagon, cylinder and other shapes of qualified charge, which can reduce the transportation and smelting cost, and improve the speed of furnace. It is mainly used for cold pressing under normal conditions for scrap metal scraps, scrap steel scraps, waste oil tank, disassembling car shell and other metal scraps with a thickness of less than 3mm. Cold pressed into blocks for easy storage and transportation or furnace.
Features:
1) Hydraulic drive, smooth and noiseless work, fast extrusion speed, large extrusion force, compact package block, not easy to be scattered.
2) high quality national standard steel plate with advanced welding technology to make the mechanical parts strong and durable, low failure rate, long service life.
3) the oil cylinder seal is imported glyd ring, good sealing performance, strong pressure resistance.
4) Convenient installation, small floor space, no foundation, foot, etc. Simple operation, detachable and PLC automatic mode.
5) Cold extrusion will not change the metal material and increase the utilization rate.
Metal Shavings Baler, Scrap Metal Baler, Waste Metal Baler, Sheet Metal Baler, Metal Scraps Baler Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.jiangyinyejing.com
Mr. Luo from a university of Singapore that S&A met last week
encountered this problem. S&A recommended that Mr. Luo may install a
ventilating duct extending to the outside (the diameter of the duct
shall be larger than that of exhaust outlet of the water chiller) at the
exhaust outlet of the water chiller. This can effectively solve the
problem of room temperature rise caused by water chiller.
Mr. Luo would like to use an S&A Water Chiller to cool the 5KW fiber laser independently researched & developed
by Mr. Luo. On the official website of S&A, Mr. Luo viewed the
types of water chiller and thought CW-7800 water chiller suitable.
S&A CW-7800ET dual-temperature dual-pump water chiller with 19KW
cooling capacity has two independent temperature control systems,
including high-temperature end and low-temperature end. The
low-temperature end mainly cools fiber body, and high-temperature end
cools QBH connector or lens.
Thank you so much for your support and trust in S&A. All S&A
water chillers have passed the certification of ISO, CE, RoHS and REACH,
and the warranty period has been extended to 2 years. Our products are
worthy of your trust!
S&A has a perfect laboratory test system to simulate the use
environment of water chillers, conduct high-temperature test and improve
quality continuously, aiming to make you use at ease; and S&A has a
complete material purchasing ecological system and adopts the mode of
mass production, with annual output of 60000 units as a guarantee for
your confidence in us.
The technical parameter of CW-7800ET: http://Products/DualpumpchillerCW78000.html
The solution to rise of room temperature caused by water chiller