Installation steps for SANY hydraulic cylinder seals
For Sany Cylinder Seal Kit,For Sany Swing Motor Seal Kit,Hydraulic Pump Seal Kit For Sany,Hydraulic Pump Seal Kit Sany Safe Seal Technology Co., Ltd. , http://www.aprseal.com
Features:
* Customer friendly operation
* Best exterior construction and good appearance* Trustable highly precise metrology equipment
* High performance for electronic parts
* High quality explosion-proof motor with strong ability against power fluctuation
* Specially designed filtering systems with build-in re-cleanable filter
* With rich functions expansion like POS for smart card and bank card
* Flexible fuel application for gasoline, diesel, and kerosene etc.
* Works well in harsh conditions, like extremely cold, hot, humid, and sand-stormy environment
Optional Configuration:
Printer,IC card, ID card, communication for FMS, vapor recovery, break away,swivle, emergency stop, LED light,ect.
Technical specifications:
Accuracy for the unit
±0.25%
Flow rate
45Â ~80L/min
Ambient temperature
-25ºC~ +55ºC; -40ºC ~ +50ºC
Relative humidity
20% - 95%
Unit noise rate
< 70dB (A);
Inlet vacuum rate for  suction pump
>=54kPa
Communication
With RS 485 port, or current loop
Power supply
AC 220V(  -15%~+10%),(50/60±1)Hz ;
AC 380V( -15%~+10%); (50/60±1)Hz
Digit of sale
7digits (decimal points can be adjusted )
Digit of volume
6digits (decimal points can be adjusted )
Digit of unit price
5digits (decimal points can be adjusted )
Totalizer of sale
0~42949672.95Â
Totalizer of volume
0~42949672.95Â
   Model
Product
Nozzle
Display
Â
Package(mm)
Gross weight
SK52Z/G/QF222B
2
2
4
2/side
1080*490*2193
293/308/230
Z: Vane  pump  G: Gear pump Q: Submersible pump 
About Us
SANKI Group includes SANKI and WENDBELL, is the leading refueling equipment manufacturer and a Total Retail Solution Supplier in China. SANKI is located in Beijing Economic-Technological Development Area, the SANKI Factory is a state of the art high-tech facility, Delivering high Quality products and Solutions with Commitment, customization Flexibility and Total Cost Ownership.
SANKI specializes in the design and manufacture of total refueling solutions for the oil and gas industry, with wide product range that covers motor spirit and diesel dispensers, LNG/LPG dispenser, SF Tanks, Skid stations, Automatic tank gauging equipment, Fuel management system & tank calibration system.
All key components manufacture, such as flow meters, pumps, and the entire electronic head are designed and manufactured in house by SANKI in China. Sanki is also the only dispenser manufacturer to have an in-house electronics board manufacturing line within their local facility.
With a manufacturing capacity over 6000 unit per month, The SANKI sales and network covers over 40 countries around the word, including Eastern Europe, Russia, Australia, Asia, Africa & South America. Within China, Sanki is also one of 3 main suppliers to China's SINOPEC and PECHOCHINA Oil companies with more then 70 Sales and Support/Service centers and 67 authorized partners across China
.
Â
1. Preparation: Clean the working surface and seals, and check if the seals are damaged or deformed.
2. Apply lubricant: Apply a layer of lubricant to the seal and sealing groove.
3. Install the seal: Place the seal into the sealing groove, ensuring that the seal is fully embedded in the groove.
4. Install O-ring: Install the O-ring above the seal, ensuring that the O-ring is fully inserted into the groove.
5. Install the piston rod: Insert the piston rod into the seal and O-ring, ensuring that the piston rod fits tightly with the seal and O-ring.
6. Install the sealing sleeve: Place the sealing sleeve on the piston rod to ensure that it fits tightly with the piston rod.
7. Tighten the nut: Use the nut to fix the sealing sleeve on the hydraulic cylinder, ensuring that the sealing sleeve is secure.
8. Check the sealing effect: Operate the hydraulic cylinder and check if there is any leakage in the sealing element. If there is any leakage, reinstall the sealing element.
Sanki Fuel Dispenser with Two Product
Trademark: SANKI
Specification: 1080*490*2193mm
Origin: Beijing Sanki
HS Code: 8413110000