Ningbo City Yinzhou Ruican Machinery Co, Ltd is direct manufacturer, covers the sand casting Foundry, Investment Casting Foundry and Machining Workshop, and offer the Ductile Iron Grey Iron Sand Casting parts, investment casting parts, Aluminium casting Stainless steel handles and hinges,Investment casting handles and hinges,Investment Casting Door Hardware,Investment Casting Furniture Hardware Ningbo City Yinzhou Ruican Machinery Co.,Ltd , https://www.cnruican.com
and precision machining parts.
The produced parts are widely used in Auto Parts : Agricultural, Marine; Architectural, Machinery, Medical; Food Machinery, Valves and so on. The material which we used Aluminium; Bronze; Brass; Copper; carbon steel; stainless steel and so on.
At the same time, we can offer the CNC MACHINING; Phosphating; Blackening Processing; Hot Dip Galvanizing: Powder Coating: Painting: Plating, Assembly for customers. 85% products are sold to overseas, the customers are from America, Canada, Europe Union, ect. i 15% products are sold in National Market. There are about 200 employees in our company now and around 10 technicians from medium to senior. We have the manufacturers and tester equipments, such as medium frequency furnaces; shot blaster; hardness tester; Spectrum Analysis tester; Metallurgical analysis tester, CMM; crack detection; surface roughness tester ISO9001: 2008 and TS16949 systerm to be sure the quality.
Safety valve should be adjusted and calibrated before use
(1) The safety valve shall be subjected to pressure test and air tightness test before installation to check the strength and sealing performance of the safety valve. Qualified before correction and adjustment. (2) On the gas test bench, correct the valve opening pressure by adjusting the load applied to the valve disc. Lever-type safety valve to adjust the hammer position, spring-loaded safety valve to adjust the amount of spring compression. Safety valve opening pressure should be consistent with the boiler, pressure vessel safety technology supervision regulations of the relevant provisions. (3) In the container, by adjusting the gap between the safety valve adjustment ring and the valve flap, to adjust the relief valve discharge pressure and seat back pressure. If the safety valve in the opening pressure only leaks and does not take-off or jump though the pressure drop after a violent vibration and "beep" sound, the gap is too large, should be adjusted to be smaller. If the back seat pressure is too low, the adjustment ring gap is too small, should be properly adjusted. Steam relief valve discharge pressure should be less than or equal to 1.03 times the opening pressure, opening and closing pressure difference should not exceed 10% of the opening pressure. Air or other gas relief valve discharge pressure should be less than or equal to 1.10 times the opening pressure, opening and closing pressure difference is not greater than 15% of the opening pressure. (4) safety valve calibration and pressure adjustment, the unit must be in charge of the safety of boiler pressure vessel presence, adjustment and calibration device with the accuracy of the pressure gauge should not be less than 1, when online calibration should be There are safety precautions. (5) calibration process, the calibration staff should make timely records. Check the qualified safety valve, the installation of the accessories should be mounted on the lead seal to prevent the well-adjusted to change the state. More Keyword Search: Safety Valve