1. Introduction of Underground Oil Distillation Plant
Underground Oil Distillation Plant ,is the new technology which can refine the underground oil into base oil(which can be made into diesel and gasoline after processed by our catalyst) by vacuum pressure distillation system. The oil quality is better than the original normal pressure distillation technology, which show on purity ,transparence, lightness .this technology will do deodorization and destinke process to the raw material oil automatically by "dry type" vacuum pressure distillation method. With the vacuum distillation technology, the distillation temperature is considerably reduced, and the oil output will higher 5%-10% compared with original normal pressure distillation technology. It makes more profits to the enterprise virtually.
2. Raw material which can be used
a. Waste oil .example: waste diesel, waste oil residue etc.
b. tire/rubber oil
c. plastic oil
d. crude oil
e. waste engine oil
f. waste motor oil
g. waste lube oil
h. waste transformer oil
i. underground oil
3. Models of underground oil distillation plant
4. Installation: We will be in charge of arranging our engineer to go to your place to guide the installation and train your workers how to operate the underground oil distillation plant ,and buyer will be in charge of the food, accommodation and round air tickets.
5.Underground Oil Distillation Plant Exporting Experience:
America:
Brazil, Canada, Colombia, USA,
Middle East:
Dubai, Iran, Jordan, Saudi Arabia, Turkey
Europe:
Albania , Bosnia and Herzegovina
Asia:
Afghanistan, India, Malaysia, Pakistan, Philippines, South Korea, Vietnam, Myanmar
Africa:
Ghana, Mozambique, Zambia
Underground Oil Distillation Plant Underground Oil Distillation Plant,Oil Distillation Equipment,Fuel Oil Refinery,Diesel Oil Recycling Distillation Plant Shangqiu Sihai Energy Technology Co., Ltd , https://www.sihaienergy.com
Name
Rubber Shock Absorber Bonded Metal Parts Damper
Material
Silicone, EPDM, NR, NBR, FKM, SBR, HNBR, IIR, CR FFKM etc
Hardness
20-85 Shore A, ± 5 Shore A
Temperature
-40°C to +300°C
Size
According to the drawing or sample
Color
According to your requirement (Panton color card)
Application
Automotive, industrial, machinery, military, electrical, medical, household etc
Performance
Good sealing & damping;
Waterproof;
Aging/ozone/oil/pressure resistance;
Low & high temperature resistanceÂ
Mode of Production
Compression, injection, injection transfer, extrusion, silicone liquid injection
ProductionÂ
CapabilitiesMachines including 150T,200T,250T, 300T and 500T
Testing instruments
Vulcanization tester, tensile tester, rubber durometer, insulation resistance tester etc
Rubber Compound
Can be  FDA, RoHs or REACH approved, and free test slabs and hardness testers can be offered forÂ
customer's testing
Package
Inner plastic bag/outside carton/wooden pallets/ or any other specialÂ
package as per customer's requirements
Notes
Models and logos can be customized as your requirements;Â
Designs and specifications are accepted
RUBBER PRODUCTS FOR CAR USE
FAQ:
Q: Are you manufacturer or trading company?
A: we are manufacturer.
Q: How to get the quickest quotation?
A: send e-mail with drawing directly.
Q: How to get quotation without drawing?
A: possible send sample, pictures or detail descriptions of products to us, we will return you drawing for confirm.
Q: I have an idea for a new product, but not sure if it can be manufactured. Can you help?A. Yes! We are always happy to work with potential customers to evaluate the technical feasibility of your idea or design and we can advise on materials, tooling and likely set-up costs.Â
Q: My custom products have already been developed on CAD. Can you use the drawings?
A. Yes! DWG, DXF, IGES, Solidworks and Rhino files can all be used to generate quotes, models and mould tools - this can save time and money in producing your parts.
Q: Can I test my idea/product before committing to mould tool manufacture?
A. Yes, we can use CAD drawings to make models for design and functional evaluations.
Q: What type of plastic material is best for my design/product?
A. Materials selection depends on the application of your design and the environment in which it will function. We will be happy to discuss the alternatives and suggest the best material.
Q: How about sample?
A: free sample is available for your quality evaluation, but you should pay the freight. Regarding customize products, sample and mould order will go first before mass production.
Â
Description
Name
Rubber Shock Absorber Bonded Metal Parts Damper
Material
Silicone, EPDM, NR, NBR, FKM, SBR, HNBR, IIR, CR FFKM etc
Hardness
20-85 Shore A, ± 5 Shore A
Temperature
-40°C to +300°C
Size
According to the drawing or sample
Color
According to your requirement (Panton color card)
Application
Automotive, industrial, machinery, military, electrical, medical, household etc
Performance
Good sealing & damping;
Waterproof;
Aging/ozone/oil/pressure resistance;
Low & high temperature resistanceÂ
Mode of Production
Compression, injection, injection transfer, extrusion, silicone liquid injection
ProductionÂ
CapabilitiesMachines including 150T,200T,250T, 300T and 500T
Testing instruments
Vulcanization tester, tensile tester, rubber durometer, insulation resistance tester etc
Rubber Compound
Can be  FDA, RoHs or REACH approved, and free test slabs and hardness testers can be offered forÂ
customer's testing
Package
Inner plastic bag/outside carton/wooden pallets/ or any other specialÂ
package as per customer's requirements
Notes
Models and logos can be customized as your requirements;Â
Designs and specifications are accepted
RUBBER PRODUCTS FOR CAR USE
FAQ:
Q: Are you manufacturer or trading company?
A: we are manufacturer.
Q: How to get the quickest quotation?
A: send e-mail with drawing directly.
Q: How to get quotation without drawing?
A: possible send sample, pictures or detail descriptions of products to us, we will return you drawing for confirm.
Q: I have an idea for a new product, but not sure if it can be manufactured. Can you help?A. Yes! We are always happy to work with potential customers to evaluate the technical feasibility of your idea or design and we can advise on materials, tooling and likely set-up costs.Â
Q: My custom products have already been developed on CAD. Can you use the drawings?
A. Yes! DWG, DXF, IGES, Solidworks and Rhino files can all be used to generate quotes, models and mould tools - this can save time and money in producing your parts.
Q: Can I test my idea/product before committing to mould tool manufacture?
A. Yes, we can use CAD drawings to make models for design and functional evaluations.
Q: What type of plastic material is best for my design/product?
A. Materials selection depends on the application of your design and the environment in which it will function. We will be happy to discuss the alternatives and suggest the best material.
Q: How about sample?
A: free sample is available for your quality evaluation, but you should pay the freight. Regarding customize products, sample and mould order will go first before mass production.
Â
Rubber Shock Absorber Bonded Metal Parts Damper
Model NO.: According to custom′s request
Car Make: Customized
Brand: Customized
Damping Force Direction: Bidirectional
Color: Black
Hardness: 30-90 Shore a
Tensile Strength: >=17MPa
Elongation at Break: >=300%
Working Temperature: -40~230 Celsius Degree
OEM/ODM: Welcomed
File: Format Auto CAD, Pdf, JPG
Trademark: According to custom′s request
Transport Package: According to Custom′s Request
Specification: According to custom′s request
Origin: China
HS Code: 4016931000
Model NO.: According to custom′s request
Car Make: Customized
Brand: Customized
Damping Force Direction: Bidirectional
Color: Black
Hardness: 30-90 Shore a
Tensile Strength: >=17MPa
Elongation at Break: >=300%
Working Temperature: -40~230 Celsius Degree
OEM/ODM: Welcomed
File: Format Auto CAD, Pdf, JPG
Trademark: According to custom′s request
Transport Package: According to Custom′s Request
Specification: According to custom′s request
Origin: China
HS Code: 4016931000
DescriptionNext Article
New Flap Check Valve ANSI
Prev Article
The Planck Friction Plate M 1698.02.001