ROADLUX HIGH QUALITY TRUCK TYRE 12.00R20-R307

ROADLUX HIGH QUALITY TRUCK TYRE 12.00R20-R307

Model NO.: 12.00R20
Cord Material: Steel Wire
Inner Tube: Inner Tube
Customized: Non-Customized
Condition: New
Tread Depth: 20.0-21.0 mm
Size 1: 10.00r20
Size 2: 11.00r20
Size 3: 12.00r20
Ply 1: 18
Ply 2: 18
Ply 3: 18
Tire Brand: ROADLUX
Quality Assurance: Whole Life Cycle
Trademark: ROADLUX
Transport Package: as Per Your Request
Specification: DOT, E4, GSO
Origin: Chaoyang City, Liaoning Province
HS Code: 401120
ROADLUX HIGH QUALITY TRUCK TYRE 12.00R20-LM307A

ROADLUX tires are manufactured by the first all-steel radial tire production facility in China, with the technical support of Dunlop, UK. The machines that manufacture ROADLUX tires are imported from Germany, Holland and Japan.

ROADLUX tires have been specially designed to keep up with market trends in terms of performance, tread designs and reliability. 

ROADLUX tires are manufactured under stringent quality control systems accredited with ISO/TS 16949:2002 and ISO 9001:2000. All tires are approved by the United States Department of Transportation (DOT) and also carry approval under the ECE certification (Emark). All ROADLUX tires display both of these marks. 

Each ROADLUX tire is acceptable for shipment only after it has passed inspection by both the naked eye and full-tire X-RAY. Customers have the satisfaction of knowing that each ROADLUX tire they sell or ride-on has been individually tested and checked, inside and out, before being shipped. 

ROADLUX tires are exported to over 70 countries around the globe. Major markets that utilize ROADLUX tires are North, Central and South America, the Middle East, Africa and South East Asia.
 

Brand		 Pattern Size Ply Load
index		 Maximum load
(kg)		 Corresponding air
pressure		 Measurement
Wheel rim 		 Allow using
wheel rim 		 New tire design
size (mm)
Single
 tire		 Double
tire		 Single
tire		 Double
tire		 Section width Outer diameter
Road
type		 Traction
type
ROADLUX R307A 11.00R20 18 152/149 3550 3250 930 930 8 8.5, 8.00V 293 1085 1096
ROADLUX R307A 12.00R20 18 154/151 3750 3450 830 830 8.5 9.0, 8.50V 315 1125 1136

For more details, please contact me:
Jerry Lee
TEL.: 0086-21-68591233
MOB.: 0086-18221636116 
Shanghai Cooper International Trading Co., Ltd.

Tungsten Carbide Roll Rings

Tungsten Carbide Roll Rings, also known as hard alloy roller ring, has been widely used in the rolling production of high-speed wire, bar, threaded steel, seamless steel pipes, etc. due to its good wear resistance, high-temperature hardness, heat fatigue resistance, thermal conductivity, and high strength.
The Tungsten Carbide Roll Rings we produce mostly come in two series: WC Co and WC Co Ni Cr, with Co and Co Ni Cr as binders ranging from 6wt% to 30wt%. From a usage perspective, hard alloy rollers have good comprehensive mechanical properties, with a bending strength of over 2200 MPa and an impact toughness of (4-6) × At 10 ^ 6J/m ^ 2, the Rockwell hardness (HRA) can reach 78~90. During the high-speed wire rolling process, the single groove steel passing amount is much higher than that of cold hard cast iron or high-speed steel rollers.

Tungsten Carbide Sleeve,Tungsten Carbide Roller, Steel Rebar Rolling,Steel Wire Rod Rolling,WC Roller

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcwelding.com

Next Article
Prev Article