Pex-Al-Pex Composite Pipe Extrusion PE and Aluminium Pipe Making Extruder

The PEX-AL-PEX Composite Pipe Extrusion  PE and aluminium pipe making extruder is professional make the metal and plastic pipes. The metal is aluminium, the plastic material can be PE, PVC,and other plastic material. The aluminium metal can Aluminum material can improve the support performance of the pipe while Plastic materials can improve the corrosion resistance of pipes.



PEX-AL-PEX Composite Pipe Extrusion  PE and aluminium pipe making extruder is including below parts:
1.Aluminum foil unwinding machine   2.Aluminum foil storage device (with ultrasonic welding connector)   3.Aluminum pipe forming system   4.Ultrasonic welding machine   5.Single screw extruder, model SJ60×30 (inner layer PEX)   6.Single screw extruder, model SJ45×25 (inner and outer layer glue)   7.Extrusion die head   8.Single screw extruder, model SJ60×30 (outer layer PEX)   9.Cooling tank (with auto air sealing system for pipe)   10.Belt haul-off unit   11.Double station coiler



SUMMARY
l Material:                      PEX, Aluminum (overlap welding)
l Pipe size range:               Ø16-32mm
l Operating direction:           from right to left
l Center height:                 1000 mm
l Machine color:                 Jiangsu XinRong standard color (white)
l Cooling water consumption:     5 m3/h  ( ≤20ºC,≥0.3MPa )
l Water pool volume:            10 m3
l Compressed air consumption:   0.3 m3/min ( >0.5MPa )
l Power supply:                 3 phase 380V( ±10% )  50Hz
l Total power:                   130 KW
l Actual power when operating:  ≈85 KW
l Overall dimension:             28000×3000×2500 mm
l Control system                  
Adopt German Siemens 10" inch human-machine interface, liquid crystal displayer, new generation programmable micro-computer control system, all operating parameters can define and show on the screen, and can setup and revise rotation speed, traction speed, melting temperature and each zone temperature.
• DC speed regulator          Eurotherm  U.K
• Inverter:                  ABB or BOSCH-REXROTH
• Low-voltage electrical parts    
                Button, switch              Schneider, France
                Contactor                  Schneider, France
                Air switch                  Schneider, France
                Intermediate relay           Schneider, France
                Temperature controller       RKC, Japan
                Heater                     Magal ceramic heater
l Circumstance:
         Working place:               indoors
         Power supply:               no dangerous area
         Temperature:                0-40ºC
         Humidity:                    85% no condensation



Technical parameter
• Screw ,barrel:                38CrMoAlA,nitriding, polishing,             depth of nitriding 0.45-0.65 mm,             surface hardness HV800-900;                                                                                                          
• Sensor model:                PT131B ,50Mpa; power source 24V, output
                               0-10V.
• Screw diameter:              Ø60 mm
• L/D :                        30 :1 
• Driving motor:             22KW (AC motor )
• AC inverter:                    ABB or BOSCH-REXROTH
• Capacity Max:           ≈ 50kg/h (PEX material, vary with different           materials and pipe size)
• Reduction gear box:           high torque, low noise, hard face special
                                     reduction gearbox for extruder
• Lubrication system:        circulating oil enforced by oil pump, 
                                infiltration and splash in oil basin
• Heating power:               20KW
• Cooling power:               4×0.18KW enforced air cooling


This is the aluminium roll forming unit.
Features:
To flatten, guide aluminum foil to form aluminum pipe.
Technical parameter             
• Number of forming wheel:     Ø16, 20, 25, 32mm  4 sets
• Aluminum alloy frame, nylon and copper wheel

The PEX-AL-PEX Composite Pipe Extrusion  PE and aluminium pipe making extruder is professional make the metal and plastic pipes. The metal is aluminium, the plastic material can be PE, PVC,and other plastic material. The aluminium metal can Aluminum material can improve the support performance of the pipe while Plastic materials can improve the corrosion resistance of pipes.



PEX-AL-PEX Composite Pipe Extrusion  PE and aluminium pipe making extruder is including below parts:
1.Aluminum foil unwinding machine   2.Aluminum foil storage device (with ultrasonic welding connector)   3.Aluminum pipe forming system   4.Ultrasonic welding machine   5.Single screw extruder, model SJ60×30 (inner layer PEX)   6.Single screw extruder, model SJ45×25 (inner and outer layer glue)   7.Extrusion die head   8.Single screw extruder, model SJ60×30 (outer layer PEX)   9.Cooling tank (with auto air sealing system for pipe)   10.Belt haul-off unit   11.Double station coiler



SUMMARY
l Material:                      PEX, Aluminum (overlap welding)
l Pipe size range:               Ø16-32mm
l Operating direction:           from right to left
l Center height:                 1000 mm
l Machine color:                 Jiangsu XinRong standard color (white)
l Cooling water consumption:     5 m3/h  ( ≤20ºC,≥0.3MPa )
l Water pool volume:            10 m3
l Compressed air consumption:   0.3 m3/min ( >0.5MPa )
l Power supply:                 3 phase 380V( ±10% )  50Hz
l Total power:                   130 KW
l Actual power when operating:  ≈85 KW
l Overall dimension:             28000×3000×2500 mm
l Control system                  
Adopt German Siemens 10" inch human-machine interface, liquid crystal displayer, new generation programmable micro-computer control system, all operating parameters can define and show on the screen, and can setup and revise rotation speed, traction speed, melting temperature and each zone temperature.
• DC speed regulator          Eurotherm  U.K
• Inverter:                  ABB or BOSCH-REXROTH
• Low-voltage electrical parts    
                Button, switch              Schneider, France
                Contactor                  Schneider, France
                Air switch                  Schneider, France
                Intermediate relay           Schneider, France
                Temperature controller       RKC, Japan
                Heater                     Magal ceramic heater
l Circumstance:
         Working place:               indoors
         Power supply:               no dangerous area
         Temperature:                0-40ºC
         Humidity:                    85% no condensation



Technical parameter
• Screw ,barrel:                38CrMoAlA,nitriding, polishing,             depth of nitriding 0.45-0.65 mm,             surface hardness HV800-900;                                                                                                          
• Sensor model:                PT131B ,50Mpa; power source 24V, output
                               0-10V.
• Screw diameter:              Ø60 mm
• L/D :                        30 :1 
• Driving motor:             22KW (AC motor )
• AC inverter:                    ABB or BOSCH-REXROTH
• Capacity Max:           ≈ 50kg/h (PEX material, vary with different           materials and pipe size)
• Reduction gear box:           high torque, low noise, hard face special
                                     reduction gearbox for extruder
• Lubrication system:        circulating oil enforced by oil pump, 
                                infiltration and splash in oil basin
• Heating power:               20KW
• Cooling power:               4×0.18KW enforced air cooling


This is the aluminium roll forming unit.
Features:
To flatten, guide aluminum foil to form aluminum pipe.
Technical parameter             
• Number of forming wheel:     Ø16, 20, 25, 32mm  4 sets
• Aluminum alloy frame, nylon and copper wheel

Grain Grinder

Grain Grinder,Food Processing Equipment ,Food Manufacturing Machines ,Industrial Food Production Machines

Processing Machinery Co., Ltd. , http://www.nbfoodmachinery.com