Zowell 3-way forklift is a special AC
electric forklift designed for professional confined space storage use.
Equipped with fork that can be rotated left and right, the forklift does not
need to turn its body in the passage, minimizing the width the aisle. Compared
with reach stacker, it can save 35% of the warehouse space, and its maximum
lifting height can reach 9m.
Fig1&2
VDA 3-way forklift
To ensure the accuracy of high stacking,
VDA's fork is equipped with HD camera and laser alignment system. The three-way
Electric Stacker lift truck with electric fork has an EPAS steering system that
ensures operation safety even if the motor has broken.
Fig3&4
HD camera and laser alignment system
There are other safety designs: OPS (operator
sensing system), driving lock, wheel display, turn speed limitation,
regenerative braking, etc.
We have prepared 3-way forklift with two
load capacity(1.2ton,1.6ton) and other additional options (such as fixed height/floor
lifting function, cold storage customization, traceless tire, magnetic track
semi-automatic guide, hydraulic fork) for you to choose from. And we believe
this kind of VNA forklift will bring you excellent advantages in modern
storage era.
Forklift Machine,VNA Forklift,Warehouse Forklift,Tri-lateral stacker, three way pallet stacker Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklifts.com
Fault Cause Remedy insufficient flow or no water [1], reverse impeller malfunction the reason Method of exclusion Low or no water flow 1, impeller reversed
2, the flow blockage
3, the motor speed is not enough
4, pumping medium concentration is too large
5, head is too high 1, adjust the impeller rotation direction
2, remove debris
3, check the power supply voltage and frequency
4, diluted with water dilute concentration
5, change the pump or reduce head ã€Can not start】 1, lack of phase
2, impeller stuck
3, winding, connector or cable break
4, the stator winding burn out
5, electrical control failure 1, check the line, to repair
2, remove debris
3, check with ohmmeter repair
4, to repair, replace the winding
5, check the controller, repair or exchange Stator burned 1, two-phase operation
2, pumping medium concentration is too large
3, the impeller stuck or loose
4, seal damage to the motor water
5, loose fasteners cause the motor water 1, 饲 逑 chanting punishment fine income
2, diluted with water
3, remove dirt, tighten the nut
4, replace the mechanical seal
5, tighten the various bolts ã€Overcurrent】 1, working voltage is low
2, pipes, impeller blocked
3, pumping liquid density or higher viscosity 1, adjust the working voltage
2, clean up the pipeline and impeller blockage
3, change the density or viscosity of pumping liquid
2, the flow blockage
3, the motor speed is not enough
4, pumping medium concentration is too large
5, lift too high 1, adjust the impeller rotation direction
2, remove debris
3, check the power supply voltage and frequency
4, diluted with water dilute concentration
5, to change the pump or lower head [can not start] 1, lack of phase
2, impeller stuck
3, winding, connector or cable break
4, the stator winding burn out
5, electrical control failure 1, check the line, to repair
2, remove debris
3, check with ohmmeter repair
4, to repair, replace the winding
5, check the controller, repair or exchange ã€Stator burnout】 1, two-phase operation
2, pumping medium concentration is too large
3, the impeller stuck or loose
4, seal damage to the motor water
5, loose fasteners caused by motor water 1?
2, diluted with water
3, remove dirt, tighten the nut
4, replace the mechanical seal
5, tighten the bolts Bolt [current is too large] 1, the working voltage is low
2, pipes, impeller blocked
3, pumping liquid density or higher viscosity 1, adjust the working voltage
2, clean up the pipeline and impeller blockage
3, change the density or viscosity of pumping liquid
JYWQ type automatically stir sewage pump troubleshooting
Next Article
Electronic ticketing system solution