The hot oil boiler has been manufactured as radiation-type; Hot oil boiler have spiral oil pipes, from seamless steel boiler tube, wrapped up with one-, two- or three-way screw-steps depending upon the capacity and the velocity values, the flow of the gases have been designed as three-directional. The most critical place in all the installment is the hot oil boiler serpentines, since this is the hottest place. The other parts of the installment are less hot as compared to here, due to this reason, the velocity of oil at the serpentines have been adjusted according to the number of tubes openings at the manufacture. Since all the oil inside the system passes from the boiler spirals, the flow is fully under control. Thus, the safely heating of the heat carrier is obtained.
Hot Oil Heater,Hot Oil Heater Boiler,Industrial Hot Oil Boiler,Low Pressure Hot Oil Boiler,Hot Oil Boiler System Henan Yuanda Boiler Co., Ltd. , https://www.industrysboiler.com
The head is with Germany technology with high sensitivity, good anti-jamming, and reliability. The size can be made into your request size.
Â
Application:
Mines, cement, thermal power, chemical industry etc. it is used for detecting bulk metallic, or shovel teeth in the ore or coal, in order not to damage the working machines.
Â
The characteristics of products:
1. The conveyor belt generally will be installed horizontal, but it can be applied to different angle according to your request.
2. 2The detector head can be separated, the belt do not need to be cut.
3. A timer is used to control the eliminating device.
Â
PARAMETERS OF PRODUCTS
Â
1. Detecting tunnel height: 100-800mm.
2. Detecting tunnel width: 1000-4000mm
3. Sensitivity: 1.2-6.0mm steel ball.
4. . Voltage:220V 50HZ
5. Alarm: Sound and light alarm, and stop automatically
6. Weight: 80-200KGS
ModelÂ
VCMÂ seriesÂ
Machine specification
Normal machine
Customized width
(mm)Detection Width
400
300Â customizedÂ
(mm)Detection HeightÂ
100
120
150
200
250
300
350
400
Detection Sensitivity
Fe(Φmm)
≥0.6
≥0.8
≥1.0
≥1.2
≥1.5
≥2.0
≥2.0
≥3.0
Non-Fe(Φmm)
≥1.0
≥1.2
≥1.5
≥2.0
≥2.5
≥2.5
≥2.5
≥3.5
304Sus(Φmm)
≥1.2
≥1.5
≥2.0
≥2.5
≥3.0
≥3.5
≥4.0
≥4.5
 Alarm and rejector system
Automatic stop by alarm and sound or push rod or falling dropÂ
Machine structureÂ
      Full structure takes of stainless 304Â
  Machine size (mm)
 L1520mm×W830mm×H1000mm if customized it will according to customized sizeÂ
 Machine weightÂ
Around 250KG if customized the weight will differentÂ
Voltage and power
  220V 50Hz  90W
   Load abilityÂ
5-25KG   conveyor belt running speed :25-30m/min or customized variousÂ
Height from the earthÂ
650mm±50mm can customizedÂ
Note :Normal size machine have stocks. Unnormal size machine have to customizedÂ
The head is with Germany technology with high sensitivity, good anti-jamming, and reliability. The size can be made into your request size.
Â
Application:
Mines, cement, thermal power, chemical industry etc. it is used for detecting bulk metallic, or shovel teeth in the ore or coal, in order not to damage the working machines.
Â
The characteristics of products:
1. The conveyor belt generally will be installed horizontal, but it can be applied to different angle according to your request.
2. 2The detector head can be separated, the belt do not need to be cut.
3. A timer is used to control the eliminating device.
Â
PARAMETERS OF PRODUCTS
Â
1. Detecting tunnel height: 100-800mm.
2. Detecting tunnel width: 1000-4000mm
3. Sensitivity: 1.2-6.0mm steel ball.
4. . Voltage:220V 50HZ
5. Alarm: Sound and light alarm, and stop automatically
6. Weight: 80-200KGS
ModelÂ
VCMÂ seriesÂ
Machine specification
Normal machine
Customized width
(mm)Detection Width
400
300Â customizedÂ
(mm)Detection HeightÂ
100
120
150
200
250
300
350
400
Detection Sensitivity
Fe(Φmm)
≥0.6
≥0.8
≥1.0
≥1.2
≥1.5
≥2.0
≥2.0
≥3.0
Non-Fe(Φmm)
≥1.0
≥1.2
≥1.5
≥2.0
≥2.5
≥2.5
≥2.5
≥3.5
304Sus(Φmm)
≥1.2
≥1.5
≥2.0
≥2.5
≥3.0
≥3.5
≥4.0
≥4.5
 Alarm and rejector system
Automatic stop by alarm and sound or push rod or falling dropÂ
Machine structureÂ
      Full structure takes of stainless 304Â
  Machine size (mm)
 L1520mm×W830mm×H1000mm if customized it will according to customized sizeÂ
 Machine weightÂ
Around 250KG if customized the weight will differentÂ
Voltage and power
  220V 50Hz  90W
   Load abilityÂ
5-25KG   conveyor belt running speed :25-30m/min or customized variousÂ
Height from the earthÂ
650mm±50mm can customizedÂ
Note :Normal size machine have stocks. Unnormal size machine have to customizedÂ
Industrial Coal Conveyor Metal Detector
Model NO.: VCM
Sensitivity: 1mm Above
Power Supply: 110V-220V
Detecting Height: 100-800mm
Detecting Width: 1000-4000mm
Trademark: Vfinder
Transport Package: Strong Cartoon Box or Ploywooden
Specification: CE and ISO
Origin: Made in China Guangdong
HS Code: 8543709100
Model NO.: VCM
Sensitivity: 1mm Above
Power Supply: 110V-220V
Detecting Height: 100-800mm
Detecting Width: 1000-4000mm
Trademark: Vfinder
Transport Package: Strong Cartoon Box or Ploywooden
Specification: CE and ISO
Origin: Made in China Guangdong
HS Code: 8543709100
industrial coal conveyor metal detector