- Â Adopting 20KHz IGBTÂ inverter technology,extremely reliable.
- Untouched pilot arc start system - Smooth Arc-Striking with HF Control.
- Quality cutting thickness with fast cutting speed,smooth cutting,small deformation and less hang slag.
- Auto-Protection against over-voltage,over-current and over-heating.
- Energy Saving - Compared with the traditional cutting machine more efficient.
   Parameter/Specification
Model Item      |
CUT 100G |
Voltage(V) | AC380V ±15% |
Frequency(Hz) | 50-60 |
Input Power(KVA) | 17.9 |
No-load Voltage(V) | 265 |
Current Range(A) | 20-100 |
Rated Duty Cycle | 60% |
Arc Striking | HF/ Pilot Arc |
Quality cutting thickness(mm) | 25 |
Max. cutting Thickness(mm) | 45 |
Recommended Cutting Pressure(Kgs/cm2) | 4-6 |
Power Factor | 0.93 |
Efficiency(%) | 85 |
Insulation Grade | F |
Housing Protection Grade | IP21S |
Weight(Kg) | 35 |
(L*W*H)(mm) | 550*280*435 |
Carton CBM(m3) | 0.162 |
      Specification | |
 Capacitor | 470uF/400V*4 |
IGBT | FF150R12KS4Â *1 |
Output Rectifier |
DAC2F100P6S*1 DAC2F100N6S*1 |
                   Front View
Â

                       Left View

        Â
         Â
                        Right View

                      Top ViewÂ

                Â
                     AccessoriesÂ

       Â
                       Package

 Performance and Features:   Â
- Â Adopting 20KHz IGBTÂ inverter technology,extremely reliable.
- Untouched pilot arc start system - Smooth Arc-Striking with HF Control.
- Quality cutting thickness with fast cutting speed,smooth cutting,small deformation and less hang slag.
- Auto-Protection against over-voltage,over-current and over-heating.
- Energy Saving - Compared with the traditional cutting machine more efficient.
   Parameter/Specification
Model Item      |
CUT 100G |
Voltage(V) | AC380V ±15% |
Frequency(Hz) | 50-60 |
Input Power(KVA) | 17.9 |
No-load Voltage(V) | 265 |
Current Range(A) | 20-100 |
Rated Duty Cycle | 60% |
Arc Striking | HF/ Pilot Arc |
Quality cutting thickness(mm) | 25 |
Max. cutting Thickness(mm) | 45 |
Recommended Cutting Pressure(Kgs/cm2) | 4-6 |
Power Factor | 0.93 |
Efficiency(%) | 85 |
Insulation Grade | F |
Housing Protection Grade | IP21S |
Weight(Kg) | 35 |
(L*W*H)(mm) | 550*280*435 |
Carton CBM(m3) | 0.162 |
      Specification | |
 Capacitor | 470uF/400V*4 |
IGBT | FF150R12KS4Â *1 |
Output Rectifier |
DAC2F100P6S*1 DAC2F100N6S*1 |
                   Front View
Â

                       Left View

        Â
         Â
                        Right View

                      Top ViewÂ

                Â
                     AccessoriesÂ

       Â
                       Package

Â
Mechanical Bar Screen
Mechanical Bar Screen is provided with several special-shaped teeth which are assembled on the teeth axis based on certain ordering, forming the sealed teeth chain. The lower part is installed in the water inlet. If the chain wheel rotates directionally with even speed, the whole rake chain will move accordingly. Under such circumstance, the solid sundries attached on the tooth will be separated from liquid and the fluid will low away through the gap. When rake chain arrives at its upper end, each group of rakes will carry on self cleaning by dropping out most of the solid material under gravity and guideline rail, while the rest of the solid will be tidied clean by back running brush.The whole process is carried out continuously and automatically so as to achieve the goal of solid-liquid separation.
Mechanical Bar Screen,Bar Screen,Coarse Bar Screen,Sewage Bar Screen,Wastewater Bar Screen
YIXING HOLLY TECHNOLOGY CO.,LTD. , https://www.watertreatment-machine.com