Stamping is a manufacturing process that involves applying pressure to a material to deform it into a desired shape or size. There are various types of stamping processes utilized in the industry, each with its unique set of advantages and disadvantages. In this article, we will describe some of the most common types of stamping processes.
Overall, stamping is a versatile manufacturing process that plays a crucial role in the production of a wide range of metal parts and components. By understanding the different types of stamping processes, manufacturers can select the most suitable process for producing high-quality parts in an efficient and cost-effective manner.
hardware stamping products, stamping part products, Precision Metal Stamping, precision metal stamping part, Stamping Processing Products NINGBO CITY YINZHOU RUICAN MACHINERY CO.,LTD , https://www.ruican-machining.com
MODELÂ OFÂ GEN-SETÂ
GB15RS
Prime power of gen-setÂ
15KW
Standby power of gen-setÂ
17.5KW
DIESELÂ Â ENGINE
Model
Ricardo 495D
Type
Water-cooled, four stroke, in-line, direct injection
No.of cyliner
4
Bore X Stroke (mm)
95x115
Ttl. Displacement (L)
3.26
Compression ratio
19:1
Induction system
natural aspired
Rated output (KW)
26.5KW
Rated speed (rpm)
1500
Fuel consumption (g/kw.h)
≤251.6
Cooling method
water-cooled with radiator
Starting method
DC 12V electric start
ALTERNATOR
ModelÂ
TFDW-15
Rated power
15KW
Rated voltage
380/220V
Rated frequency
50HZ
Rated speed (rpm)
1500
Power factor
0.8
Phase connection
 three-phase
Winding connection
 4 -wire connectedÂ
Excitation method
Brushless
Insulation class
H
Voltage regulation
AVR
CONTROLÂ PANEL
Smartgen 410 digital panel, air breaker, transfer switch, temp.and pressure gauges, indicating lamp, hour meter, key starter, etc.
EMERGENCYÂ STOPÂ SYSTEM
Low oil pressure, high water temperature, Over-speed and over load, etc.;
NOISEÂ LEVEL
68dBÂ @Â 7Â meters
NET WET (Silent type)
850
PACKING SIZE (Silent type)
2000x960x1100
MODELÂ OFÂ GEN-SETÂ
GB15RS
Prime power of gen-setÂ
15KW
Standby power of gen-setÂ
17.5KW
DIESELÂ Â ENGINE
Model
Ricardo 495D
Type
Water-cooled, four stroke, in-line, direct injection
No.of cyliner
4
Bore X Stroke (mm)
95x115
Ttl. Displacement (L)
3.26
Compression ratio
19:1
Induction system
natural aspired
Rated output (KW)
26.5KW
Rated speed (rpm)
1500
Fuel consumption (g/kw.h)
≤251.6
Cooling method
water-cooled with radiator
Starting method
DC 12V electric start
ALTERNATOR
ModelÂ
TFDW-15
Rated power
15KW
Rated voltage
380/220V
Rated frequency
50HZ
Rated speed (rpm)
1500
Power factor
0.8
Phase connection
 three-phase
Winding connection
 4 -wire connectedÂ
Excitation method
Brushless
Insulation class
H
Voltage regulation
AVR
CONTROLÂ PANEL
Smartgen 410 digital panel, air breaker, transfer switch, temp.and pressure gauges, indicating lamp, hour meter, key starter, etc.
EMERGENCYÂ STOPÂ SYSTEM
Low oil pressure, high water temperature, Over-speed and over load, etc.;
NOISEÂ LEVEL
68dBÂ @Â 7Â meters
NET WET (Silent type)
850
PACKING SIZE (Silent type)
2000x960x1100
Blanking: Blankings are flat pieces of sheet metal that have been precisely cut and punched out from larger sheets of metal. Blanking is a process used to produce these flat pieces, and is ideal for producing large quantities of uniform, flat parts.
Coining: Coining is a stamping process used to create impressively flat and precise features - often used in creating coins or bearing seals.
Drawing: Drawing involves pulling a flat piece of metal through a die with a punch tool to form it into a three-dimensional shape. This process is commonly used in the creation of products such as automobile fenders, cans, and ship hulls.
Embossing: Embossing is the process of applying raised designs or patterns to a flat piece of metal by impressing the metal with a die. This process is popularly used in the production of decorations and signage.
Piercing: Piercing is the process of punching or drilling holes in a metal sheet. It is widely used in creating products such as luggage tags, name plates, and metal attachments.
Blanking and forming: Blanking and forming involve using a single die to create a part that has a variety of features, both flat and formed. It is a highly efficient process for creating complex parts.
15kw Ricardo Silent Power Diesel Generator Set
Model NO.: GB15RS
Conditions of Use: Land Use
Usage: Common Units
Landuse Type of Unit: Low Noise
Excitation Mode: AC Rotating Exciter
Trademark: neutral
Transport Package: Carton and Bracket
Specification: 15KW prime power
Origin: China
HS Code: 85021100
Model NO.: GB15RS
Conditions of Use: Land Use
Usage: Common Units
Landuse Type of Unit: Low Noise
Excitation Mode: AC Rotating Exciter
Trademark: neutral
Transport Package: Carton and Bracket
Specification: 15KW prime power
Origin: China
HS Code: 85021100