020605 Electrode & Nozzle Max200, Ht2000 Plasma Cutting Cutter Torch Consumable

SURPASSING OEM QUALITY HIGH PERFORMANCE WELDING TORCHES AND PARTS 
Our continual product development program produces better designs - longer lasting equipment - higher quality parts and consumables.

Unparalleled expertise in gas flow mechanics and airflow dynamics at a micron level - knowledge and experience that makes  Torch Tip the world leader in welding and cutting technologies - plus over 15 years experience producing welding torches, guns, repair and replacement parts, tips, nozzles and consumables.

FASTER CLEANER CUTS 
Our plasma cutting torch conversion kit brings High Density plasma cutting to standard equipment.

Easyweld, with more than 15 years' experience, a professional supplier in welding & cutting consumables & equipments.

EasyWeld is in no way affiliated with above brand names. The parts advertised for sale are not genuine parts, but are parts made for & by our company. Reference to above brands' machine, torches and numbers are for your convenience only. We reserve the right to substitute genuine parts in place of EasyWeld parts.

Q & A
1.Q: Do you have your own factory?
A: Yes, we have. Our factories located Shandong & Jiangsu province.
 
2.Q: What is the MOQ?
A: MOQ usually be 100pcs. Small quantity is also available.Generally if you choose the different products,our minimum order QTY.also will be different.
 
3.Q: Is sample available and the sample fee refundable?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
 
4.Q: What is the available shipping way?
A: Small quantity usually choose DHL, Fedex, UPS and EMS etc.international door to door express. Bulk order would be sea/ air shipping.
 
5.Q: How many days does it take for mass production?
A: Usually it takes 15 workdays after confirming order.

SURPASSING OEM QUALITY HIGH PERFORMANCE WELDING TORCHES AND PARTS 
Our continual product development program produces better designs - longer lasting equipment - higher quality parts and consumables.

Unparalleled expertise in gas flow mechanics and airflow dynamics at a micron level - knowledge and experience that makes  Torch Tip the world leader in welding and cutting technologies - plus over 15 years experience producing welding torches, guns, repair and replacement parts, tips, nozzles and consumables.

FASTER CLEANER CUTS 
Our plasma cutting torch conversion kit brings High Density plasma cutting to standard equipment.

Easyweld, with more than 15 years' experience, a professional supplier in welding & cutting consumables & equipments.

EasyWeld is in no way affiliated with above brand names. The parts advertised for sale are not genuine parts, but are parts made for & by our company. Reference to above brands' machine, torches and numbers are for your convenience only. We reserve the right to substitute genuine parts in place of EasyWeld parts.

Q & A
1.Q: Do you have your own factory?
A: Yes, we have. Our factories located Shandong & Jiangsu province.
 
2.Q: What is the MOQ?
A: MOQ usually be 100pcs. Small quantity is also available.Generally if you choose the different products,our minimum order QTY.also will be different.
 
3.Q: Is sample available and the sample fee refundable?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
 
4.Q: What is the available shipping way?
A: Small quantity usually choose DHL, Fedex, UPS and EMS etc.international door to door express. Bulk order would be sea/ air shipping.
 
5.Q: How many days does it take for mass production?
A: Usually it takes 15 workdays after confirming order.

PU Pneumatic Pipe

There are many kinds of pneumatic pipes, which are generally produced with PU raw materials, with stable quality, high pressure resistance, weather resistance, wear resistance, zigzag resistance, smooth and flexible pipe body, bright color, high elasticity, winding resistance and small bending radius.

The tube body is smooth and flexible, bright color, high elasticity, winding resistance and small bending radius. Temperature range: - 15 - + 70 ℃.

Product classification

1. Pu pneumatic pipe

2. Pu (polyether) pneumatic pipe

3. Pu (polyurethane) bobbin

4. Pu (polyether) bobbin

difference:

Polyurethane pneumatic pipe is over air type. If it is used for over water, its service life will be affected,

Polyether pneumatic pipe can pass air or water, with more stable physical properties and longer normal service life. It is an ideal material for pneumatic pipe.

The bobbin is wrapped with a layer of fiber in the middle of the common pneumatic pipe. Therefore, the bobbin is more solid, pressure resistant and non explosive than the common pneumatic pipe.

Product selection

What should be considered when choosing the type of plastics for blow molding pneumatic pipe?

The following aspects should be considered in the selection of pneumatic pipe materials.

Whether the wall thickness of the welded blank of the pneumatic pipe can be kept uniform, whether a higher blowing pressure is needed, whether the blowing is uniform, whether the surface of the pneumatic pipe is bright, whether the demoulding is easy, and whether the strength can meet the requirements, etc.

Performance comparison of plastics for blow molding pneumatic pipe. The pneumatic tube formed by blow molding is in thermoelastic state, and its density is smaller than that after cooling and shaping, resulting in shrinkage. For the general size of pneumatic pipe is not strict, forming shrinkage has little effect. But for the pneumatic pipes of specified size, such as some hoses used in precision machines, large shrinkage has a considerable impact. The larger the blowing volume is, the more significant the effect is.

The advantages of extruding and blowing plastic forming pneumatic pipe are less investment in production equipment, simple equipment structure, easy mold manufacturing, high forming of pneumatic pipe during production, uniform temperature control, and various specifications of pneumatic pipe can be formed. The disadvantage is that the wall thickness uniformity of pneumatic pipe is poor.

The advantages of injection blow molding pneumatic pipe are that the plastic pneumatic pipe has good product quality, accurate dimensions, no seams, uniform wall thickness, multi-mode molding production, high degree of automation, which is very suitable for large-scale high-efficiency production of small specifications. The disadvantage is that the investment of equipment and molding die is large, and the operation and production need skilled workers.

Product advantages

Excellent flexibility. The bending radius is small and the bending resistance is good. It has high elastic recovery memory effect.

Wear resistance, tearing and impact. It can resist some non corrosive chemicals and oils. It can circulate inflammable objects and weld.

It can be incinerated into ash 100% and is recognized as an environmental protection product

Good damping, smooth inner wall, low friction coefficient, high medium passing capacity, good flame retardant, non-toxic and tasteless,

The color can be customized on demand for easy pipeline identification.

Applicable range of pneumatic pipe

Assemble all kinds of pneumatic tools, pneumatic automation machinery, air compressor and all kinds of connecting pneumatic components.

performance parameter

Abrasion resistance: 30mg

Ultimate elongation: 390-480%

Burst pressure: 20-30kgf / cm2

Working vacuum: - 25hg60-15kgf / cm2

Tensile strength: 300kgf / cm2

The safety factor ratio of burst pressure and long-time service pressure is 3:1

Tips for pneumatic pipe

Polyurethane pneumatic hose is suitable for compressed air, ordinary industrial water and non corrosive oil. In order to maintain a long service life, it must be used under rated working pressure and ambient temperature. As the temperature rises, the working pressure should be reduced accordingly. If it exceeds the limit, the hose may break. If the fluid temperature is too high or the fluid is corrosive, the hose may break. If the working environment temperature is too high or there is chemical gas in the working space, the hose may crack. If the hose is stored in a wet place or the storage period is too long, the hose may hydrolyze or age, which may lead to fracture

Pu Pneumatic Pipe,Pu Air Hose,Pu Pneumatic Hose,Pneumatic Spring Hose, Pu Pneumatic Hose Tubing

Glove Industry Co.,Ltd. , https://www.glovemech.com